Completely rewrite SPEC
--- type: change message: |- Completely rewrite SPEC It's good this time, and complete. After this rewrite it will be necessary to update a lot of the code, since quite a few things got renamed. change_hash: AG0s3yILU+0uIZltVY7A9/cgxr/pXk2MzGwExsY/hbIc credentials: - type: pgp_signature pub_key_id: 95C46FA6A41148AC body: iQIzBAABAgAdFiEEJ6tQKp6olvZKJ0lwlcRvpqQRSKwFAl6kqNsACgkQlcRvpqQRSKztwQ//R3maov9GxmLAAl1jF34ZWqS6et5EmMMDRH8KtD6PB05r9j+Z1etMbaW/dAcXzXcXZpEWmj7xhfR67nyFL5yYEGcBnEUGcEMD9uMOF3QrKrBKmvsDUinIsWQV48cu0R8hY6akqhklYbK/W/S1PXdgBOn+hLuFyoN1Xa9NiHIZSfYwEYrEWE7Pg769lqtEugRv/nIYdO3slEDdubl4bGCf1gt9gowEprod7xaieil8TlKBCFNNR6Eb+GmyhyRBymUR8ANqMUgOzW1hcmRyUFAVSOPraM0Lrze8+nYzvXINqsswp98ZWXz+tOKCHkjRox/HrLsDEhbws4e6S6ngtnFNDEMi9idJH5jYcoH89RLUUggCDbehEF6vfb2En1QbCSIkxR/uAYoQo0pxXMzEdgSjSPNltOvE6I0qWyX9RcSFr/vbVx8C5TDmchZt6CMnlioa27B2SWJxfs5opfHHIHSEQyI4keaDOx6RgU5TfzjBVqCLFjWRiYrxu/ZlNuQDRyTnHKjBnIkhOvcjh78/iBv0Vdkns6R3yE7X9TxKnPs4tfhFOa+ftg2bNjIQS3IN2hLlrsJuRYiImL34zj1s0NbALFVRQCcyY190BnTN3FCqzKTUbriuoo/MeAWW/soPpy9HUhWGh3KdcmqZbfNaosiMIDirwEkPtLYMXHfPH7NfZ9w= account: mediocregopher
This commit is contained in:
mediocregopher
Brian Picciano
parent
c2c7fdf691
commit
351048e9aa
@ -10,10 +10,7 @@ Must be able to feel good about showing the project publicly, as well as be able
|
||||
to accept help from people asking to help.
|
||||
|
||||
* Figure out commit range syntax, use that everywhere.
|
||||
* Create a branch which is just a public "welcome thread", which can be part of
|
||||
the tutorials.
|
||||
* Tutorials
|
||||
* Update SPEC; it's sloppy, out-of-date, and incomplete.
|
||||
* Maybe move external host?
|
||||
|
||||
## Milestone: IPFS support
|
||||
|
||||
652
SPEC.md
652
SPEC.md
@ -1,48 +1,434 @@
|
||||
# SPEC
|
||||
|
||||
This document attempts to describe, at minimum, every aspect of the dehub
|
||||
protocol which would be required to know in order to create an alternate
|
||||
implementation of dehub. It is currently sloppily written and incomplete.
|
||||
This document describes the dehub protocol.
|
||||
|
||||
## .dehub
|
||||
This document assumes that the reader is familiar with git, both conceptually
|
||||
and in practical use of the git tool. All references to a git-specific concept
|
||||
retain their meaning; dehub concepts build upon git concepts, but do not
|
||||
override them.
|
||||
|
||||
The `.dehub` directory contains all meta information related to
|
||||
decentralized repository management and access control.
|
||||
## dehub Project
|
||||
|
||||
A dehub project is comprised of:
|
||||
|
||||
* A collection of files and directories.
|
||||
|
||||
* Meta actions related to those files, e.g. discussion, proposed changes, etc.
|
||||
|
||||
* Configuration defining which meta actions are allowed under which
|
||||
circumstances.
|
||||
|
||||
All of these components are housed in a git repository. A dehub project does not
|
||||
require a central repository location (a "remote"), though it may use one if
|
||||
desired.
|
||||
|
||||
## Commit Payload
|
||||
|
||||
All commits in a dehub project contain a payload. The payload is encoded into
|
||||
the commit message as a YAML object. Here is the general structure of a commit
|
||||
message containing a payload:
|
||||
|
||||
```
|
||||
Human readable message head
|
||||
|
||||
---
|
||||
# Three dashes indicate the start of the yaml body.
|
||||
|
||||
type: type of the payload # Always required
|
||||
fingerprint: std-base-64 string # Always required
|
||||
credentials:[...] # Not required but usually present
|
||||
|
||||
type_specific_field_a: valueA
|
||||
type_specific_field_b: valueB
|
||||
```
|
||||
|
||||
The message head is a human readable description of what is being committed, and
|
||||
is terminated at the first newline. Everything after the message head must be
|
||||
valid YAML which encodes the payload.
|
||||
|
||||
### Fingerprint
|
||||
|
||||
Each payload object contains a `fingerprint` field. The fingerprint is an opaque
|
||||
byte string encoded using standard base-64. The algorithm used to generate the
|
||||
fingerprint will depend on the payload type, and can be found in each type's
|
||||
sub-section in this document.
|
||||
|
||||
### Credential
|
||||
|
||||
The `credentials` field is not requires, but in practice will be found on almost
|
||||
every payload. The field's value will be an array of credential objects. Only
|
||||
one credential object is currently supported, `pgp_signature`:
|
||||
|
||||
```yaml
|
||||
type: pgp_signature
|
||||
|
||||
# One of these fields is required. If account_id is present, it relates the
|
||||
# signature to a pgp_public_key signifier defined for that account in the config
|
||||
# (see the Signifier sub-section). Otherwise, the public key will be included in
|
||||
# the credential itself as the value of pub_key_body.
|
||||
account_id: some_user_id # Optional
|
||||
pub_key_body: inlined ASCII-armored pgp public key
|
||||
|
||||
# the ID (pgp fingerprint) of the key used to generate the signature
|
||||
pub_key_id: XXX
|
||||
|
||||
# a signature of the payload's unencoded fingerprint, encoded using standard
|
||||
# base-64
|
||||
body: std-base-64 signature
|
||||
```
|
||||
|
||||
### Payload Types
|
||||
|
||||
#### Change Payload
|
||||
|
||||
A change payload encompasses a set of changes to the files in the project. To
|
||||
construct the change payload one must reference the file tree of the commit
|
||||
which houses the payload as well as the file tree of its parent commit;
|
||||
specifically one must take the difference between them.
|
||||
|
||||
A change payload looks like this:
|
||||
|
||||
```yaml
|
||||
type: change
|
||||
fingerprint: std-base-64 string
|
||||
credentials: [...]
|
||||
description: |-
|
||||
The description will generally start with a single line, followed by a long-form body
|
||||
|
||||
The description corresponds to the body of a commit message in a "normal"
|
||||
git repo. It gives a more-or-less long-form explanation of the changes being
|
||||
made to the project's files.
|
||||
```
|
||||
|
||||
##### Change Payload Fingerprint
|
||||
|
||||
The unencoded fingerprint of a change payload is calculated as follows:
|
||||
|
||||
* Concatenate the following:
|
||||
* A uvarint indicating the number of bytes in the description string.
|
||||
* The description string.
|
||||
* A uvarint indicating the number of files changed between this commit and
|
||||
its parent.
|
||||
* For each file changed, ordered lexographically-ascending based on its full
|
||||
relative path within the git repo:
|
||||
* A uvarint indicating the length of the full relative path of the file
|
||||
within the repo, as a string.
|
||||
* The full relative path of the file within the repo, as a string.
|
||||
* A little-endian uint32 representing the previous file mode of the file
|
||||
(or 0 if the file is not present in the parent commit's tree).
|
||||
* The 20-byte SHA1 hash of the contents of the previous version of the file
|
||||
(or 20 0 bytes if the file is not present in the parent commit's tree).
|
||||
* A little-endian uint32 representing the new file mode of the file (or 0
|
||||
if the file is not present in the current commit's tree).
|
||||
* The 20-byte SHA1 hash of the contents of the new version of the file (or
|
||||
20 0 bytes if the file is not present in the current commit's tree).
|
||||
* Calculate the SHA-256 hash of the concatenation result.
|
||||
* Prepend a 0 byte to the result of the SHA-256 hash.
|
||||
|
||||
This unencoded fingerprint is then standard base-64 encoded, and that is used as
|
||||
the value of the fingerprint field.
|
||||
|
||||
#### Comment Payload
|
||||
|
||||
A comment payload encompasses no file changes, and is used only to contain a
|
||||
comment made by a single user.
|
||||
|
||||
A comment payload looks like this:
|
||||
|
||||
```yaml:
|
||||
type: comment
|
||||
fingerprint: std-base-64 string
|
||||
credentials: [...]
|
||||
comment: |-
|
||||
Hey all, how's it going?
|
||||
|
||||
Just wanted to pop by and say howdy.
|
||||
```
|
||||
|
||||
The message head of a comment payload will generally be a truncated form of the
|
||||
comment itself.
|
||||
|
||||
##### Comment Payload Fingerprint
|
||||
|
||||
The unencoded fingerprint of a comment payload is calculated as follows:
|
||||
|
||||
* Concatenate the following:
|
||||
* A uvarint indicating the number of bytes in the comment string.
|
||||
* The comment string.
|
||||
* Calculate the SHA-256 hash of the concatenation result.
|
||||
* Prepend a 0 byte to the result of the SHA-256 hash.
|
||||
|
||||
This unencoded fingerprint is then standard base-64 encoded, and that is used as
|
||||
the value of the fingerprint field.
|
||||
|
||||
#### Credential Payload
|
||||
|
||||
A credential payload contains only one or more credentials for an arbitrary
|
||||
fingerprint. Credential payloads can be combined with other payloads of the same
|
||||
fingerprint to create a new payload with many credentials.
|
||||
|
||||
A credential payload looks like this:
|
||||
|
||||
```yaml
|
||||
type: credential
|
||||
fingerprint: std-base-64 string
|
||||
credentials: [...]
|
||||
|
||||
# This field is not required, but can be helpful in situations where the
|
||||
# fingerprint was generated based on multiple change payloads
|
||||
fingerprint_commits:
|
||||
- commit hash
|
||||
- commit hash
|
||||
- commit hash
|
||||
```
|
||||
|
||||
## Project Configuration
|
||||
|
||||
The `.dehub` directory contains all meta information related to the dehub
|
||||
project. All files within `.dehub` are tracked by the git repo like any other
|
||||
files in the project.
|
||||
|
||||
### config.yml
|
||||
|
||||
The `.dehub/config.yml` file takes the following structure:
|
||||
The `.dehub/config.yml` file contains a yaml encoded configuration object:
|
||||
|
||||
```yaml
|
||||
# accounts defines all accounts which are known to the repo.
|
||||
accounts:
|
||||
accounts: [...]
|
||||
access_controls: [...]
|
||||
```
|
||||
|
||||
# Each account is an object with an id and at least one identifier. The id
|
||||
# must be unique for each account.
|
||||
- id: some_user_id:
|
||||
Both fields are described in their own sub-section below.
|
||||
|
||||
# signifiers describes different methods the account might use to
|
||||
# identify itself. Generally, these will be different public keys which
|
||||
# commits will be signed with. At least one is required.
|
||||
signifiers:
|
||||
- type: "pgp_public_key"
|
||||
body: "FULL PGP PUBLIC KEY STRING"
|
||||
#### Account
|
||||
|
||||
- type: "pgp_public_key_file"
|
||||
path: ".dehub/some_user_id.asc"
|
||||
An account defines a specific user of the project. Every account has an ID; no
|
||||
two accounts within a project may share the same ID.
|
||||
|
||||
- type: "keybase"
|
||||
user: "some_keybase_user_id"
|
||||
An account looks like this:
|
||||
|
||||
# access_controls define who may do what in the repo. The value is a list of
|
||||
# access control objects, each containing an action (allow or deny) and a set of
|
||||
# filters. If a commit matches all filters (or if there are no filters) then the
|
||||
# action is taken. If not, then the next access control is attempted.
|
||||
#
|
||||
# If no access controls match a commit, then the default list is used, which
|
||||
# will definitely match. The following is the default set, which is enumerated
|
||||
# here for informational purposes only; it does not normally need to be defined.
|
||||
access_controls:
|
||||
```yaml
|
||||
id: some_string
|
||||
signifiers: [...]
|
||||
```
|
||||
|
||||
##### Signifier
|
||||
|
||||
A signifier is used to signify that an account has taken some action. The most
|
||||
common use-case is to prove that an account created a particular credential. An
|
||||
account may have more than one signifier.
|
||||
|
||||
Currently there is only one signifier type, `pgp_public_key`:
|
||||
|
||||
```yaml
|
||||
type: pgp_public_key
|
||||
|
||||
# Path to ASCII-armored pgp public key, relative to repo root.
|
||||
path: .dehub/account.asc
|
||||
```
|
||||
|
||||
or
|
||||
|
||||
```yaml
|
||||
type: pgp_public_key
|
||||
body: inlined ASCII-armored pgp public key
|
||||
```
|
||||
|
||||
#### Access Control
|
||||
|
||||
An access control allows or denies a particular commit from becoming a part of
|
||||
the project. Each action control has an action (allow or deny) and a set of
|
||||
filters:
|
||||
|
||||
```yaml
|
||||
action: allow # or deny
|
||||
filters: [...]
|
||||
```
|
||||
|
||||
When a verifying a commit against a project's access controls, each access
|
||||
control's filters are applied to the commit in the order they appear in the
|
||||
configuration. The first access control for which all filters match is found,
|
||||
and its action is taken.
|
||||
|
||||
An access control with no filters matches all commits.
|
||||
|
||||
##### Filters
|
||||
|
||||
There are many kinds of access control filters. Any filter can be applied to a
|
||||
commit, with no other input, and produce a boolean value. All filters have a
|
||||
`type` field which indicates their type.
|
||||
|
||||
###### Signature Filter
|
||||
|
||||
A filter of type `signature` asserts that a commit's payload contains signature
|
||||
credentials with certain properties. A signature filter must have one of these
|
||||
fields, which define the set of users or accounts whose signatures are
|
||||
applicable.
|
||||
|
||||
* `account_ids: [...]` - an array of account IDs, each having been defined in the
|
||||
accounts section of the configuration.
|
||||
|
||||
* `any_account: true` - matches any account defined in the accounts section of
|
||||
the configuration.
|
||||
|
||||
* `any: true` - matches any signature, whether or not its signifier has been
|
||||
defined in the configuration.
|
||||
|
||||
A `count` field may also be included. Its value may be a number or a string
|
||||
indicating a percent (e.g. `"50%"`). If not included it will be assumed to be
|
||||
`1`.
|
||||
|
||||
The count indicates how many accounts from the specified set must have a
|
||||
signature included. If a percent is given then that will be multiplied against
|
||||
the size of the set (rounded up) to determine the necessary number.
|
||||
|
||||
Here are some example signature filters, and explanations for each:
|
||||
|
||||
```yaml
|
||||
# requires that 2 of the 3 specified accounts has a signature credential on
|
||||
# the commit.
|
||||
type: signature
|
||||
account_ids:
|
||||
- amy
|
||||
- bill
|
||||
- colleen
|
||||
count: 2
|
||||
```
|
||||
|
||||
```yaml
|
||||
# requires that every account defined in the configuration has a signature
|
||||
# credential on the commit.
|
||||
type: signature
|
||||
any_account: true
|
||||
count: 100%
|
||||
```
|
||||
|
||||
```yaml
|
||||
# requires at least one signature credential, not necessarily from an account.
|
||||
type: signature
|
||||
any: true
|
||||
```
|
||||
|
||||
###### Branch Filter
|
||||
|
||||
A filter of type `branch` matches the commit based on which branch in the repo
|
||||
it is being or has been committed to. Matching is performed on the short name
|
||||
of the branch, using globstar pattern matching.
|
||||
|
||||
A branch filter can have one or multiple patterns defined. The filter will match
|
||||
if at least one defined pattern matches the short form of the branch name.
|
||||
|
||||
A branch filter with only one pattern can be defined like this:
|
||||
|
||||
```yaml
|
||||
type: branch
|
||||
pattern: some_branch
|
||||
```
|
||||
|
||||
A branch filter with multiple patterns can be defined like this:
|
||||
|
||||
```yaml
|
||||
type: branch
|
||||
patterns:
|
||||
- some_branch
|
||||
- branch*glob
|
||||
- amy/**
|
||||
```
|
||||
|
||||
###### Files Changed Filter
|
||||
|
||||
A filter of type `files_changed` matches the commit based on which files were
|
||||
changed between the tree of the commit's parent and the commit's tree. Matching
|
||||
is performed on the paths of the changed files, relative to the repo root.
|
||||
|
||||
A files changed filter can have one or multiple patterns defined. The filter
|
||||
will match if at least one defined pattern matches for every file changed.
|
||||
|
||||
(TODO this may change to be: `The filter will match if any of the changed files
|
||||
matches at least one defined pattern.`)
|
||||
|
||||
A files changed filter with only one pattern can be defined like this:
|
||||
|
||||
```yaml
|
||||
type: files_changed
|
||||
pattern: .dehub/*
|
||||
```
|
||||
|
||||
A files changed filter with multiple patterns can be defined like this:
|
||||
|
||||
```yaml
|
||||
type: files_changed
|
||||
patterns:
|
||||
- some/dir/*
|
||||
- foo_files_*
|
||||
- **.jpg
|
||||
```
|
||||
|
||||
###### Payload Type Filter
|
||||
|
||||
A filter of type `payload_type` matches a commit based on the type of its
|
||||
payload. A payload type filter can have one or more types defined. The filter
|
||||
will match if the commit's payload type matches at least one of the defined
|
||||
types.
|
||||
|
||||
A payload type filter with only one matching type can be defined like this:
|
||||
|
||||
```yaml
|
||||
type: payload_type
|
||||
payload_type: comment
|
||||
```
|
||||
|
||||
A payload type filter with multiple matching types can be defined like this:
|
||||
|
||||
```yaml
|
||||
type: payload_type
|
||||
payload_types:
|
||||
- comment
|
||||
- change
|
||||
```
|
||||
|
||||
###### Commit Attributes Filter
|
||||
|
||||
A filter of type `commit_attributes` matches a commit based on certain
|
||||
attributes it has. A commit attributes filter may have one or more fields
|
||||
defined, each corresponding to a different attribute the commit may have. If
|
||||
more than one field is defined then all corresponding attributes on the commit
|
||||
must match for the filter to match.
|
||||
|
||||
Currently the only possible attribute is `non_fast_forward: true`, which matches
|
||||
a commit which is not an ancestor of the HEAD of the branch it's being pushed
|
||||
onto. This attribute only makes sense in the context of a pre-receive git hook.
|
||||
|
||||
A commit attributes filter looks like this:
|
||||
|
||||
```yaml
|
||||
type: commit_attributes
|
||||
non_fast_forward: true
|
||||
```
|
||||
|
||||
###### Not Filter
|
||||
|
||||
A filter of type `not` matches a commit using the negation of a sub-filter,
|
||||
defined within the not filter. If the sub-filter returns true for the commit,
|
||||
then the not filter returns false, and vice-versa.
|
||||
|
||||
A not filter looks like this:
|
||||
|
||||
```
|
||||
type: not
|
||||
filter:
|
||||
# a branch filter is used as the sub-filter in this example
|
||||
type: branch
|
||||
pattern: main
|
||||
```
|
||||
|
||||
##### Default Access Controls
|
||||
|
||||
These access controls will be implicitly appended to the list defined in the
|
||||
configuration:
|
||||
|
||||
```yaml
|
||||
# Any account may add any commit to any non-main branch, provided there is at
|
||||
# least one signature credential. This includes non-fast-forwards.
|
||||
- action: allow
|
||||
filters:
|
||||
- type: not
|
||||
@ -53,193 +439,55 @@ access_controls:
|
||||
any_account: true
|
||||
count: 1
|
||||
|
||||
# Non-fast-forwards are denied in all other cases. In effect, one cannot
|
||||
# force-push onto the main branch.
|
||||
- action: deny
|
||||
filters:
|
||||
- type: commit_attributes
|
||||
non_fast_forward: true
|
||||
|
||||
# Any account may add any change commit to the main branch, provided there is
|
||||
# at least one signature credential.
|
||||
- action: allow
|
||||
filters:
|
||||
- type: branch
|
||||
pattern: main
|
||||
- type: commit_type
|
||||
commit_type: change
|
||||
- type: payload_type
|
||||
payload_type: change
|
||||
- type: signature
|
||||
any_account: true
|
||||
count: 1
|
||||
|
||||
# All other actions are denied.
|
||||
- action: deny
|
||||
```
|
||||
|
||||
## Change Hash
|
||||
These default access controls provide a useful baseline of requirements that all
|
||||
projects will (hopefully) find useful in their infancy.
|
||||
|
||||
When a change commit (see Commits section) is being signed by a signifier there
|
||||
is an expected data format for the data to be signed. The format is a SHA-256
|
||||
hash of the following pieces of data concatenated together:
|
||||
## Commit Verification
|
||||
|
||||
* A uvarint indicating the number of bytes in the commit message.
|
||||
* The message.
|
||||
* A uvarint indicating the number of files changed.
|
||||
* For each file changed in the commit, ordered lexographically-ascending based
|
||||
on its full relative path within the repo, the following is then written:
|
||||
* A uvarint indicating the length of the full relative path of the file
|
||||
within the repo.
|
||||
* The full relative path of the file within the repo.
|
||||
* A little-endian uint32 representing the previous file mode of the file (or 0
|
||||
if the file is being inserted).
|
||||
* The 20-byte SHA1 hash of the previous version of the file's contents (or 20
|
||||
0 bytes if the file is being inserted).
|
||||
* A little-endian uint32 representing the new file mode of the file (or 0
|
||||
if the file is being deleted).
|
||||
* The 20-byte SHA1 hash of the new version of the file's contents (or 20
|
||||
0 bytes if the file is being deleted).
|
||||
The dehub protocol is designed such that every commit is "verifiable". A
|
||||
verifiable commit has the following properties:
|
||||
|
||||
The raw output from the SHA-256 is then prepended with a `0` byte (for forward
|
||||
compatibility). The result is the raw change hash.
|
||||
* Its fingerprint is correctly formed.
|
||||
* All of its credentials are correctly formed.
|
||||
* If they are signatures, they are valid signatures of the commit's
|
||||
unencoded fingerprint.
|
||||
* The project's access controls allow the commit.
|
||||
|
||||
## Comment Message Hash
|
||||
The project's configuration is referenced frequently when verifying a commit,
|
||||
such as when determining which access controls to apply and discovering
|
||||
signifiers of accounts. In all cases the configuration as defined in the
|
||||
commit's _parent_ is used when verifying that commit. The exception is the prime
|
||||
commit, which uses its own configuration.
|
||||
|
||||
When a comment commit (see Commits section) is being signed by the signifier of
|
||||
the author there is an expected data format for the data to be signed, very
|
||||
similar to how change hashes are signed. The format is a SHA-256 hash of the
|
||||
following pieces of data concatenated together:
|
||||
### Prime Commit
|
||||
|
||||
* A uvarint indicating the number of bytes in the comment message.
|
||||
* The message.
|
||||
The prime commit is the trusted seed of the project. When a user clones and
|
||||
verifies a dehub project they must, implicitly or explicitly, trust the contents
|
||||
of the prime commit. All other commits must be ancestors of the prime commit.
|
||||
|
||||
The raw output from the SHA-256 is then prepended with a `0` byte (for forward
|
||||
compatibility). The result is the raw comment hash.
|
||||
Manually specifying a prime commit is not currently spec'd, but it will be.
|
||||
|
||||
## Credentials
|
||||
|
||||
All file changes need to have some kind of credential to be accepted into the
|
||||
`main` branch (see Main Branch section). Each credential is encoded as a yaml
|
||||
object with a `type` field.
|
||||
|
||||
All credentials contain enough information to correspond them to a specific
|
||||
signifier in the `config.yml`, so as to be able to verify them.
|
||||
|
||||
### PGP Signature Credential
|
||||
|
||||
Currently there is only a single credential type, the `pgp_signature`, which
|
||||
signs a raw change hash (which is communicated out-of-band of the object):
|
||||
|
||||
```
|
||||
type: pgp_signature
|
||||
account_id: some_user_id
|
||||
pub_key_id: XXX
|
||||
body: "base-64 signature body"
|
||||
```
|
||||
|
||||
## Commits
|
||||
|
||||
All commit messages in dehub repositories are expected to follow the following
|
||||
template (newlines included, yaml comments start with `#` and are only for
|
||||
informational purposes):
|
||||
|
||||
```
|
||||
Human readable message head
|
||||
|
||||
---
|
||||
# Three dashes indicate the start of the yaml body. Everything after must be
|
||||
# valid yaml.
|
||||
|
||||
type: type of the commit # Always required
|
||||
fieldA: valueA
|
||||
fieldB: valueB
|
||||
```
|
||||
|
||||
### Change Commits
|
||||
|
||||
Commits of type `change` correspond to the standard git commit; they encompass a
|
||||
set of file changes as well as a message describing the changes which occurred.
|
||||
They extend the standard git commit with a few dehub specific features, such as
|
||||
the change hash and credentials.
|
||||
|
||||
`change` commits are, currently, the _only_ commit type which are allowed to
|
||||
have file changes.
|
||||
|
||||
Example change commit message:
|
||||
|
||||
```
|
||||
This is the message head. It will be re-iterated within the message field
|
||||
|
||||
---
|
||||
type: change
|
||||
message: >
|
||||
This is the message head. It will be re-iterated within the message field
|
||||
|
||||
The rest of this field is for the message body, which corresponds to the
|
||||
body of a normal commit message which might give a more long-form
|
||||
explanation of the commit's changes.
|
||||
|
||||
Since the message is used in generating the signature it's necessary for it
|
||||
to be encoded here fully formed, even though the message head is then
|
||||
duplicated. Otherwise the exact bytes of the message would be ambiguous.
|
||||
This situation is ugly, but not unbearable.
|
||||
|
||||
# The change_hash is able to be computed from the commit's message and changed
|
||||
# files, but is reproduced in the commit message for forward compatibility, e.g.
|
||||
# if the algorithm to compute the hash changes.
|
||||
change_hash: XXX
|
||||
|
||||
# Credentials are the set of credentials which indicate approval of the change
|
||||
credentials:
|
||||
- type: pgp_signature
|
||||
account_id: some_user_id
|
||||
pub_key_id: XXX
|
||||
body: "base-64 signature body"
|
||||
```
|
||||
|
||||
### Credential Commits
|
||||
|
||||
Commits of type `credential` contain one or more credentials for some hash
|
||||
(presumably a change hash, but in the future there may be other types). The
|
||||
commit message head is not spec'd, but should be a human-readable description of
|
||||
"who is crediting what, and how".
|
||||
|
||||
Example credential commit message:
|
||||
|
||||
```
|
||||
some_user_id pgp sig of commits AAA..BBB with key CCC
|
||||
|
||||
---
|
||||
type: credential
|
||||
credentialed_hash: XXX
|
||||
credentials:
|
||||
- type: pgp_signature
|
||||
account_id: some_user_id
|
||||
pub_key_id: CCC
|
||||
body: "base-64 signature body"
|
||||
```
|
||||
|
||||
### Comment Commits
|
||||
|
||||
Commits of type `comment` contain a message for others to read. The commit
|
||||
message head is not spec'd, but should be a human-readable description of "who
|
||||
is commenting what".
|
||||
|
||||
Example credential commit message:
|
||||
|
||||
```
|
||||
some_user_id has commented: Hey all, how's it going?
|
||||
|
||||
---
|
||||
type: comment
|
||||
|
||||
# The message_hash is computed from the message, and reproduced here for
|
||||
# forwards compatibility. See the Comment Message Hash section.
|
||||
message_hash: XXX
|
||||
message: >
|
||||
Hey all, how's it going?
|
||||
|
||||
Just wanted to pop by and say howdy.
|
||||
|
||||
# credentials can contain a signature from the author of this comment's
|
||||
# message_hash.
|
||||
credentials:
|
||||
- type: pgp_signature
|
||||
account_id: some_user_id
|
||||
pub_key_id: CCC
|
||||
body: "base-64 signature body"
|
||||
```
|
||||
|
||||
## TODO
|
||||
|
||||
* Access controls
|
||||
* Update credential commit section
|
||||
By default the prime commit is the root commit of the `main` branch.
|
||||
|
||||
Loading…
Reference in New Issue
Block a user