AppDir/cryptic-net.desktop

@@ -1,6 +1,6 @@
 [Desktop Entry]
-Name=Isle
+Name=Cryptic Net
-Name[en]=Isle
+Name[en]=Cryptic Net
 Exec=AppRun
 
 Icon=cryptic-logo

AppDir/etc/daemon.yml

@@ -1,12 +1,12 @@
 
 #
 # This file defines all configuration directives which can be modified for
-# the isle daemon at runtime. All values specified here are the
+# the cryptic-net daemon at runtime. All values specified here are the
 # default values.
 #
 ################################################################################
 
-# A DNS service runs as part of every isle process.
+# A DNS service runs as part of every cryptic-net process.
 dns:
 
   # list of IPs that the DNS service will use to resolve requests outside the
@@ -15,7 +15,7 @@ dns:
     - 1.1.1.1
     - 8.8.8.8
 
-# A VPN service runs as part of every isle process.
+# A VPN service runs as part of every cryptic-net process.
 vpn:
 
   # Enable this field if the vpn will be made to be publicly accessible at a

README.md

@@ -4,9 +4,9 @@ rely on it for anything._**
 
 -----
 
-# Isle
+# cryptic-net
 
-The Isle project provides the foundation for an **autonomous community
+The cryptic-net project provides the foundation for an **autonomous community
 cloud infrastructure**.
 
 This project targets communities of individuals, where certain members of the
@@ -14,7 +14,7 @@ community would like to host services and applications from servers running in
 their homes or offices. These servers can range from simple Raspberry Pis to
 full-sized home PCs.
 
-The core components of Isle, currently, are:
+The core components of cryptic-net, currently, are:
 
 * A VPN which enables direct peer-to-peer communication. Even if most hosts in
   the network are on a private LAN (e.g. their home WiFi network) or have a
@@ -28,7 +28,7 @@ The core components of Isle, currently, are:
   within the network.
 
 These components are wrapped into a single binary, with all setup being
-automated. Isle takes "just works" very seriously.
+automated. cryptic-net takes "just works" very seriously.
 
 Participants are able to build upon these foundations to host services for
 themselves and others. They can be assured that their communications are private
@@ -37,9 +37,9 @@ third parties involved.
 
 ## Documentation
 
-Isle users fall into different roles, depending on their level of
+cryptic-net users fall into different roles, depending on their level of
-involvement and expertise within their particular network. The documentation
+involvement and expertise within their particular network. The documentation for
-is broken down by these categories, so that the reader can easily
+cryptic-net is broken down by these categories, so that the reader can easily
 decide which documents they need to care about.
 
 ### User Docs
@@ -90,19 +90,19 @@ Documentation for admins:
 
 ### Dev Docs
 
-Devs may or may not be users in any particular isle network. They instead are
+Devs may or may not be users in any particular cryptic network. They instead are
-those who work on the actual code for Isle.
+those who work on the actual code for cryptic-net.
 
 Documentation for devs:
 
 * [Design Principles](docs/dev/design-principles.md)
-* [`isle daemon` process tree](docs/dev/daemon-process-tree.svg): Diagram
+* [`cryptic-net daemon` process tree](docs/dev/daemon-process-tree.svg): Diagram
   describing the [pmux](https://code.betamike.com/micropelago/pmux) process tree
-  created by `isle daemon` at runtime.
+  created by `cryptic-net daemon` at runtime.
 * [Rebuilding Documentation](docs/dev/rebuilding-documentation.md)
 * [Releases](docs/dev/releases.md)
 * [Gateway](docs/dev/gateway.md): Tentative spec for gateway functionality in
-  Isle.
+  cryptic-net
 
 ## Misc
 

default.nix

@@ -25,7 +25,7 @@
 in rec {
 
   version = pkgs.stdenv.mkDerivation {
-    name = "isle-version";
+    name = "cryptic-net-version";
 
     inherit buildSystem hostSystem revision releaseName;
     repoSrc = ./.;
@@ -80,7 +80,7 @@ in rec {
   };
 
   rootedBootstrap = pkgs.stdenv.mkDerivation {
-    name = "isle-rooted-bootstrap";
+    name = "cryptic-net-rooted-bootstrap";
 
     src = bootstrap;
 
@@ -92,10 +92,10 @@ in rec {
   };
 
   appDir = pkgs.stdenv.mkDerivation {
-    name = "isle-AppDir";
+    name = "cryptic-net-AppDir";
 
     src = pkgs.buildEnv {
-      name = "isle-AppDir-base";
+      name = "cryptic-net-AppDir-base";
       paths = [
 
         ./AppDir
@@ -122,7 +122,7 @@ in rec {
   appimagetool = pkgs.callPackage ./nix/appimagetool.nix {};
 
   appImage = pkgs.stdenv.mkDerivation {
-    name = "isle-AppImage";
+    name = "cryptic-net-AppImage";
     src = appDir;
 
     nativeBuildInputs = [
@@ -133,19 +133,19 @@ in rec {
 
     builder = builtins.toFile "build.sh" ''
       source $stdenv/setup
-      cp -rL "$src" isle.AppDir
+      cp -rL "$src" cryptic-net.AppDir
-      chmod +w isle.AppDir -R
+      chmod +w cryptic-net.AppDir -R
 
       export VERSION=debug
 
       # https://github.com/probonopd/go-appimage/issues/155
       unset SOURCE_DATE_EPOCH
 
-      appimagetool ./isle.AppDir
+      appimagetool ./cryptic-net.AppDir
 
       mkdir -p "$out"/bin
       chmod +w "$out" -R
-      mv Isle-* "$out"/bin/isle
+      mv Cryptic_Net-* "$out"/bin/cryptic-net
     '';
   };
 }

docs/admin/adding-a-host-to-the-network.md

@@ -4,16 +4,16 @@ This document guides an admin through adding a single host to the network. Keep
 in mind that the steps described here must be done for _each_ host the user
 wishes to add.
 
-There are two ways for a user to add a host to the isle network.
+There are two ways for a user to add a host to the cryptic network.
 
-- If the user is savy enough to obtain their own `isle` binary, they can
+- If the user is savy enough to obtain their own `cryptic-net` binary, they can
   do so. The admin can then generate a `bootstrap.yml` file for their host,
-  give that to the user, and the user can run `isle daemon` using that
+  give that to the user, and the user can run `cryptic-net daemon` using that
   bootstrap file.
 
-- If the user is not so savy, the admin can generate a custom `isle`
+- If the user is not so savy, the admin can generate a custom `cryptic-net`
   binary with the `bootstrap.yml` embedded into it. The user can be given this
-  binary and run `isle daemon` without any configuration on their end.
+  binary and run `cryptic-net daemon` without any configuration on their end.
 
 From the admin's perspective the only difference between these cases is one
 extra step.
@@ -43,7 +43,7 @@ To create a `bootstrap.yml` file for the new host, the admin should perform the
 following command from their own host:
 
 ```
-isle hosts create-bootstrap \
+cryptic-net hosts create-bootstrap \
     --hostname <name> \
     --ip <ip> \
     --admin-path <path to admin.yml> \
@@ -54,9 +54,9 @@ The resulting `bootstrap.yml` file should be treated as a secret file that is
 shared only with the user it was generated for. The `bootstrap.yml` file should
 not be re-used between hosts either.
 
-If the user already has access to a `isle` binary then the new
+If the user already has access to a `cryptic-net` binary then the new
 `bootstrap.yml` file can be given to them as-is, and they can proceed with
-running their host's `isle daemon`.
+running their host's `cryptic-net daemon`.
 
 ### Encrypted `admin.yml`
 
@@ -66,7 +66,7 @@ GPG is being used to secure `admin.yml` then the following could be used to
 generate a `bootstrap.yml`:
 
 ```
-gpg -d <path to admin.yml.gpg> | isle hosts create-bootstrap \
+gpg -d <path to admin.yml.gpg> | cryptic-net hosts create-bootstrap \
     --hostname <name> \
     --ip <ip> \
     --admin-path - \

docs/admin/creating-a-new-network.md

@@ -1,9 +1,9 @@
 # Creating a New Network
 
-This guide is for those who wish to start a new isle network of their
+This guide is for those who wish to start a new cryptic network of their
 own.
 
-By starting a new isle network, you are becoming the administrator of a
+By starting a new cryptic network, you are becoming the administrator of a
 network. Be aware that being a network administrator is not necessarily easy,
 and the users of your network will frequently need your help in order to have a
 good experience. It can be helpful to have others with which you are
@@ -42,7 +42,7 @@ A `daemon.yml` will need to be created for use during network creation. You can
 create a new `daemon.yml` with default values filled in by doing:
 
 ```
-isle admin create-network --dump-config > /path/to/daemon.yml
+cryptic-net admin create-network --dump-config > /path/to/daemon.yml
 ```
 
 Open this file in a text editor and perform the following changes:
@@ -70,7 +70,7 @@ be chosen with care.
   networks](https://en.wikipedia.org/wiki/IPv4#Private_networks), but within
   that selection the choice is up to you.
 
-* Domain: isle is shipped with a DNS server which will automatically
+* Domain: cryptic-net is shipped with a DNS server which will automatically
   configure itself with all hosts in the network, with each DNS entry taking the
   form of `hostname.hosts.domain`, where `domain` is the domain chosen in this
   step. The domain may be a valid public domain or not, it's up to you.
@@ -86,7 +86,7 @@ be chosen with care.
 ## Step 3: Prepare to Encrypt `admin.yml`
 
 The `admin.yml` file (which will be created in the next step) is the most
-sensitive part of an isle network. If it falls into the wrong hands it can be
+sensitive part of a cryptic network. If it falls into the wrong hands it can be
 used to completely compromise your network, impersonate hosts on the network,
 and will likely lead to someone stealing or deleting all of your data.
 
@@ -103,7 +103,7 @@ To create the `admin.yml` file, which effectively creates the network itself,
 you can run:
 
 ```
-sudo isle admin create-network \
+sudo cryptic-net admin create-network \
     --config-path /path/to/daemon.yml \
     --name <name> \
     --ip-net <ip/subnet-prefix> \
@@ -132,10 +132,10 @@ At this point you should have an `admin.yml.gpg` file in your current directory.
 
 ## Step 5: Run the Daemon
 
-The isle daemon can be run now, using the following command:
+The cryptic-net daemon can be run now, using the following command:
 
 ```
-sudo isle daemon -c /path/to/daemon.yml
+sudo cryptic-net daemon -c /path/to/daemon.yml
 ```
 
 **NOTE** that you _must_ use the same `daemon.yml` file used when creating the
@@ -145,4 +145,9 @@ At this point your host, and your network, are ready to go! You can reference
 the [Getting Started](../user/getting-started.md) document to set up your
 host's daemon process in a more permanent way.
 
+## Next Steps
+
+* Add users
+* Fix directories
+
 [ddns]: https://www.cloudflare.com/learning/dns/glossary/dynamic-dns/

docs/dev/daemon-process-tree.plantuml

@@ -1,7 +1,7 @@
 @startuml
 hide empty description
 
-state "./isle daemon -c ./daemon.yml" as init
+state "./cryptic-net daemon -c ./daemon.yml" as init
 
 state AppDir {
 

docs/dev/design-principles.md

@@ -1,20 +1,21 @@
 # Design Principles
 
 The following points form the basis for all design decisions made within the
-Isle project.
+cryptic-net project.
 
 * The UX is aggressively optimized to eliminate manual intervention by users.
   All other concerns are secondary. The concept of "UX" extends beyond GUI
-  interfaces, and encompasses all interactions of any sort with an isle
+  interfaces, and encompasses all interactions of any sort with a cryptic-net
   process.
 
-* All resources within an isle network are expected to be hosted on hardware
+* All resources within a cryptic-net are expected to be hosted on hardware owned
-  owned by community members, for example home media servers or gaming rigs.
+  by community members, for example home media servers or gaming rigs. Thus, a
-  Thus, an isle is fully autonomous.
+  cryptic-net is fully autonomous.
 
 * Hardware resources are expected to be heterogenous and geographically
   dispersed.
 
 * It is expected that a single host might be a part of multiple, independent
-  isle networks. These should not conflict with each other, nor share resources.
+  cryptic networks. These should not conflict with each other, nor share
+  resources.
 

docs/dev/gateway.md

@@ -1,7 +1,7 @@
 # Gateway
 
 This document acts as the spec for a general purpose gateway system built into
-the isle daemon.
+the cryptic-net daemon.
 
 The high level goal of the gateway is to remove significant barriers to entry
 for individuals hosting data and services at their own domain names:
@@ -15,21 +15,21 @@ network they will have already solved these problems. By providing gateway
 functionality they can share that work with their community.
 
 The gateway functions by serving requests for a user's DNS domain on their
-behalf. Requests are served by publicly facing hosts of an isle network using
+behalf. Requests are served by publicly facing hosts of a cryptic network using
 a backend configured by the user.
 
 ## Terminology
 
 * "gateway process" refers to the the system process running on a single host
-  which serves requests for an isle network's gateway.
+  which serves requests for a cryptic network's gateway.
 
 * "gateway" refers to the collection of all gateway processes which are
-  configured and running for an isle network. All gateway processes exhibit
+  configured and running for a cryptic network. All gateway processes exhibit
   the same behavior, and serve the same domain names, and so are conceived as
   being a single unit.
 
 * "gateway DNS name" refers to the single DNS domain or subdomain which contains
-  a A/AAAA record for each of the gateway processes of an isle network.
+  a A/AAAA record for each of the gateway processes of a cryptic network.
 
 ## Gateway DNS Setup
 
@@ -57,7 +57,7 @@ to serve requests at a domain. Backends could include:
 - Public git repositories (like how github pages works)
 - S3 buckets on the private garage cluster
 - IPFS files or IPNS names
-- Services which are available privately over an isle network
+- Services which are available privately over cryptic network
 
 A backend is uniquely described and identified by an object containing a `type`
 field, and then further fields which depend on the type. The object for a git
@@ -73,14 +73,14 @@ repository backend would look like:
 
 All backends essentially act as a static filesystem, from which requests are
 served by the gateway. For example, given a domain `example.com` which has been
-configured with an isle network gateway to serve a git repo, if
+configured with a cryptic network gateway to serve a git repo, if
 `example.com/foo/bar` is requested then the file at `/foo/bar` within the
 current tip of the git repo is served.
 
 ## User Experience
 
 It should be noted up-front that a gateway user should not need to have any
-hosts registered on an isle network, or have any other material connection to
+hosts registered on a cryptic network, or have any other material connection to
 the network, in order to use the gateway.
 
 ### Setup a Domain
@@ -105,7 +105,7 @@ instructions. The instructions prompt the user to:
 
 * Add a CNAME record to their DNS domain, pointing to the gateway DNS name.
 
-* Add a TXT record to their DNS domain containing `isle_gateway=<opaque
+* Add a TXT record to their DNS domain containing `cryptic_net_gateway=<opaque
   string>`.
 
 The page provides the user with an input box to input their domain name into,
@@ -194,7 +194,7 @@ They are not meant to be set in stone.
 
 ## Future Work
 
-It should be possible for someone accessing a private domain on the isle
+It should be possible for someone accessing a private domain on the cryptic
 network to access the gateway web panel and use it _without_ requiring a secret
 passphrase. This way community members who have already been vetted (by being
 added to the VPN) can have even less friction.

docs/dev/rebuilding-documentation.md

@@ -1,6 +1,6 @@
 # Rebuilding Documentation
 
-Most documentation for Isle takes the form of markdown (`.md`) files,
+Most documentation for cryptic-net takes the form of markdown (`.md`) files,
 which do not require any build step. There are a few other kinds of files, such
 as `.plantuml` files, which do require a build step. If these are changed then
 their artifacts should be rebuilt by doing:

docs/dev/releases.md

@@ -15,7 +15,7 @@ A release consists of:
 To create a release only a functional nix installation is required. Simply run
 the `./release.sh` script, and input a release name when prompted.
 
-From here an `isle` binary will be cross-compiled for all supported
+From here a cryptic-net binary will be cross-compiled for all supported
 platforms. This will take a long time the first time you perform it on your
 machine.
 

docs/glossary.md

@@ -4,17 +4,14 @@ The purpose of this document is define the specific terms which should be used
 for various concepts, with the goal of establishing consistency throughout
 documentation and source code.
 
-- "Isle" - The name of this project, which is a proper noun and so should always
+- "user" - a person who takes part in the usage, operation, or administration of
-  be capitalized.
+  a cryptic network.
 
-- "isle" - The name of the binary or program produced by the Isle project. isle
+- "host" - A computer or device used by a user to connect to a cryptic network.
-  is the name of the file itself, and so is always lower-case.
 
-- "host" - A computer or device on which isle is run.
+- "cryptic network", "network" - A collection of hosts which communicate and
-
+  share resources with each other via the mechanisms provided by the cryptic-net
-- "isle network", "network" - A collection of hosts which communicate and share
+  project.
-  resources with each other via the Isle project.
-
-- "user" - A person who takes part in the usage, operation, or administration of
-  an isle network.
 
+- "cryptic-net" - The name of the binary or program which is used to interact
+  with a cryptic network.

docs/operator/contributing-a-lighthouse.md

@@ -1,7 +1,7 @@
 # Contributing a Lighthouse
 
 The [nebula][nebula] project provides the VPN component which is used by
-Isle. Every nebula network requires at least one (but preferably more)
+cryptic-net. Every nebula network requires at least one (but preferably more)
 publicly accessible hosts. These hosts are called lighthouses.
 
 Lighthouses do _not_ route traffic between hosts on the VPN. Rather, they
@@ -10,7 +10,7 @@ NAT punching through any NATs that hosts might be behind. As such, they are very
 lightweight to run, and require no storage resources at all.
 
 If your host machine has a public static IP, or a dynamic public IP with
-[dDNS][ddns] set up, then it can contribute a lighthouse.
+[dDNS][ddns] set up, then it can contribute a lighthouse for cryptic-net.
 
 [nebula]: https://github.com/slackhq/nebula
 [ddns]: https://www.cloudflare.com/learning/dns/glossary/dynamic-dns/
@@ -30,7 +30,7 @@ Configure your host's firewall to allow all UDP traffic on that port.
 
 First, if you haven't already, [create a `daemon.yml`
 file](../user/creating-a-daemonyml-file.md). This will be used to
-configure your `isle daemon` process with the public address that other
+configure your `cryptic-net daemon` process with the public address that other
 hosts can find your daemon on.
 
 ## Edit daemon.yml
@@ -41,6 +41,6 @@ port.
 
 ## Restart the Daemon
 
-With the `daemon.yml` configured, you should restart your `isle daemon`
+With the `daemon.yml` configured, you should restart your `cryptic-net daemon`
 process. On startup the daemon will add its public address to the global
 configuration, which other hosts will pick up on and begin using.

docs/operator/contributing-storage.md

@@ -8,7 +8,7 @@ to the network, then this document is for you.
 
 First, if you haven't already, [create a `daemon.yml`
 file](../user/creating-a-daemonyml-file.md). This will be used to
-configure your `isle daemon` process with the storage locations and
+configure your `cryptic-net daemon` process with the storage locations and
 capacities you want to contribute.
 
 ## Edit `daemon.yml`
@@ -31,13 +31,13 @@ storage:
   allocations:
 
     # 1.2 TB are being shared from drive1
-    - data_path: /mnt/drive1/isle/data
+    - data_path: /mnt/drive1/cryptic-net/data
-      meta_path: /mnt/drive1/isle/meta
+      meta_path: /mnt/drive1/cryptic-net/meta
       capacity: 1200
 
     # 100 GB (the minimum) are being shared from drive2
-    - data_path: /mnt/drive2/isle/data
+    - data_path: /mnt/drive2/cryptic-net/data
-      meta_path: /mnt/drive2/isle/meta
+      meta_path: /mnt/drive2/cryptic-net/meta
       capacity: 100
 ```
 
@@ -48,17 +48,17 @@ is properly set up for providing storage.
 
 ## Restart the Daemon
 
-With the `daemon.yml` configured, you should restart your `isle daemon`
+With the `daemon.yml` configured, you should restart your `cryptic-net daemon`
 process.
 
-The `isle daemon` will automatically allow the ports used for your
+The `cryptic-net daemon` will automatically allow the ports used for your
 storage allocations in the vpn firewall.
 
 ## Further Reading
 
-Isle uses the [garage][garage] project for its storage system. See the
+cryptic-net uses the [garage][garage] project for its storage system. See the
 [Managing Garage](managing-garage.md) document for more
 information on how to interact directly with the garage instance being run by
-isle.
+cryptic-net.
 
 [garage]: https://garagehq.deuxfleurs.fr/documentation/quick-start/

docs/operator/firewalls.md

@@ -10,28 +10,29 @@ the host's firewall, and the VPN firewall.
 
 ## VPN Firewall
 
-Isle uses the [nebula](https://github.com/slackhq/nebula) project to
+cryptic-net uses the [nebula](https://github.com/slackhq/nebula) project to
 provide its VPN layer. Nebula ships with its own [builtin
 firewall](https://nebula.defined.net/docs/config/firewall), which only applies
 to connections coming in over the virtual network interface which it creates.
-This firewall can be manually configured as part of isle's
+This firewall can be manually configured as part of cryptic-net's
 [`daemon.yml`](../user/creating-a-daemonyml-file.md) file.
 
 Any storage instances which are defined as part of the `daemon.yml` file will
-have their network ports automatically added to the VPN firewall by isle.
+have their network ports automatically added to the VPN firewall by cryptic-net.
 This means that you only need to configure the VPN firewall if you are hosting
-services for your isle network besides storage.
+services for your cryptic network besides storage.
 
 ## Host Firewall
 
-The host you are running isle on will almost definitely have a firewall
+The host you are running cryptic-net on will almost definitely have a firewall
 running, separate from the VPN firewall. If you wish to provide services for
-your isle network from your host, you will need to allow their ports in your
+your cryptic network from your host, you will need to allow their ports in your
 host's firewall.
 
-**isle does _not_ automatically configure your host's firewall to any extent!**
+**cryptic-net does _not_ automatically configure your host's firewall to any
+extent!**
 
-One option is to open your host to all traffic from your isle network, and
+One option is to open your host to all traffic from your cryptic network, and
 allow the VPN firewall to be fully responsible for filtering traffic. To do this
 on Linux using iptables, for example, you would add something like this to your
 iptables configuration:

docs/operator/managing-garage.md

@@ -1,11 +1,11 @@
 # Managing Garage
 
 The garage project provides the network storage component for
-Isle. If you're reading this document then you would likely benefit
+cryptic-net. If you're reading this document then you would likely benefit
 greatly from reading the [garage documentation][garage] on their website. It's
 extremely well written and concise.
 
-Note that the `isle daemon` process will handle all setup steps described
+Note that the `cryptic-net daemon` process will handle all setup steps described
 in that documentation, but it's still good to have an understanding of how
 garage works and what it can do.
 
@@ -13,12 +13,12 @@ garage works and what it can do.
 
 ## Garage Runtime Note
 
-There is an important thing to note regarding how isle runs garage. As
+There is an important thing to note regarding how cryptic-net runs garage. As
 described in the [Contributing Storage](contributing-storage.md) document, a
-single `isle daemon` process can be configured to provide any number of
+single `cryptic-net daemon` process can be configured to provide any number of
 storage allocations.
 
-For each allocation which is configured, `isle daemon` will configure and
+For each allocation which is configured, `cryptic-net daemon` will configure and
 run a separate `garage server` instance as a sub-process. Each garage will use
 the host's name as its zone in the garage cluster layout, which means that the
 cluster will prefer to not replicate the same data within the same host, but may
@@ -26,14 +26,14 @@ do so if necessary.
 
 ## Garage CLI
 
-Every `isle` binary contains a full `garage` binary embedded into it.
+Every `cryptic-net` binary contains a full `garage` binary embedded into it.
 This binary can be accessed directly like so:
 
 ```
-sudo isle garage cli <subcmd> <args>
+sudo cryptic-net garage cli <subcmd> <args>
 ```
 
-Before handing off execution to the `garage` binary, the `isle` process
+Before handing off execution to the `garage` binary, the `cryptic-net` process
 will automatically set up the RPC host and secret environment variables.
 
 If the host which is running the command has more than one allocation
@@ -47,7 +47,7 @@ connected to.
 To display the current layout of the garage cluster:
 
 ```
-sudo isle garage cli layout show
+sudo cryptic-net garage cli layout show
 ```
 
 **(DO NOT CHANGE THE CLUSTER LAYOUT UNLESS YOU KNOW WHAT YOU'RE DOING!)**
@@ -55,11 +55,11 @@ sudo isle garage cli layout show
 To create a new bucket:
 
 ```
-sudo isle garage cli bucket create new-bucket
+sudo cryptic-net garage cli bucket create new-bucket
 ```
 
 To list existing buckets:
 
 ```
-sudo isle garage cli bucket list
+sudo cryptic-net garage cli bucket list
 ```

docs/roadmap.md

@@ -31,17 +31,17 @@ automatically serves DNS queries, unless set to not do so in `daemon.yml`.
 
 ### Install sub-command
 
-It would be great to have a `isle install` sub-command which would
+It would be great to have a `cryptic-net install` sub-command which would
 auto-detect the installed operating system and install the daemon automatically.
 
 ### Web server + interface
 
-One idea is to have every `isle daemon` run a webserver as one of its
+One idea is to have every `cryptic-net daemon` run a webserver as one of its
 sub-processes. This server could serve multiple functions:
 
 - [Gateway service](./dev/gateway.md).
 
-- Local interface for the `isle daemon` process. For example, status and
+- Local interface for the `cryptic-net daemon` process. For example, status and
   connectivity information for the local host could be provided via a simple web
   interface, which the user can open in their browser. This saves us the effort
   of needing to develop UIs for individual OSs. This could also make remotely
@@ -65,7 +65,7 @@ needed would be:
 
 ### Don't run as root
 
-It's currently a pretty hard requirement for `isle daemon` to run as
+It's currently a pretty hard requirement for `cryptic-net daemon` to run as
 root. This is due to:
 
 - nebula's network interface root to be started.
@@ -73,7 +73,7 @@ root. This is due to:
 - dnsmasq listening on port 53, generally a protected port.
 
 If we can't figure out how to get these things running from the start as
-non-privileged users, we at least need to get isle to drop privileges
+non-privileged users, we at least need to get cryptic-net to drop priveleges
 from root after initial startup.
 
 ### Plugins

docs/shell.nix

@@ -3,7 +3,7 @@
   pkgs ? (import ../nix/pkgs.nix).pkgs,
 
 }: pkgs.mkShell {
-  name = "isle-build-docs";
+  name = "cryptic-net-build-docs";
   buildInputs = [ pkgs.plantuml ];
 
   shellHook = ''

docs/user/creating-a-daemonyml-file.md

@@ -1,6 +1,6 @@
 # Creating a daemon.yml File
 
-The `isle daemon` process has generally sane defaults and does not need
+The `cryptic-net daemon` process has generally sane defaults and does not need
 to be configured for most users. This document describes how to use the
 `daemon.yml` file to handle those cases where configuration is necessary.
 
@@ -10,11 +10,11 @@ First, create a `daemon.yml` file. You can create a new `daemon.yml` with
 default values filled in by doing:
 
 ```
-isle daemon --dump-config > /path/to/daemon.yml
+cryptic-net daemon --dump-config > /path/to/daemon.yml
 ```
 
 If you open that file in a text editor you can view all default values that
-`isle daemon` ships with, as well as documentation for all configurable
+`cryptic-net daemon` ships with, as well as documentation for all configurable
 parameters. Feel free to edit this file as needed.
 
 ## Using daemon.yml
@@ -23,10 +23,10 @@ With the `daemon.yml` created and configured, you can configure your daemon
 process to use it by passing it as the `--config-path` argument:
 
 ```
-sudo isle daemon --config-path /path/to/daemon.yml
+sudo cryptic-net daemon --config-path /path/to/daemon.yml
 ```
 
-If you are an operator then your host should be running its `isle daemon`
+If you are an operator then your host should be running its `cryptic-net daemon`
 process in systemd (see [Getting Started](getting-started.md) if
 not), and you will need to modify the service file accordingly.
 

docs/user/getting-started.md

@@ -1,7 +1,7 @@
 # Getting Started
 
-This document will guide you through the process of obtaining an isle
+This document will guide you through the process of obtaining a cryptic-net
-binary and joining a network.
+binary and joining the network.
 
 NOTE currently only linux machines with the following architectures are
 supported:
@@ -15,7 +15,7 @@ supported:
 
 More OSs and architectures coming soon!
 
-## Obtaining an isle Binary
+## Obtaining a cryptic-net Binary
 
 Every host can have a binary built for it which has all configuration for that
 host embedded directly into it. Such binaries require no extra configuration by
@@ -28,7 +28,7 @@ Note that if you'd like to join the network on multiple devices, each device
 will needs its own binary, so be sure to tell your admin how many you want to
 add and their names.
 
-### Obtaining an isle Binary, the Hard Way
+### Obtaining a cryptic-net Binary, the Hard Way
 
 Alternatively, you can build your own binary by running the following from the
 project's root:
@@ -37,7 +37,7 @@ project's root:
 nix-build -A appImage
 ```
 
-(*NOTE* Dependencies of `isle` seemingly compile all of musl and rust
+(*NOTE* Dependencies of `cryptic-net` seemingly compile all of musl and rust
 from scratch (it's not clear why, blame garage!). If you have not otherwise
 configured it, nix might be using a tmpfs as its build directory, and the
 capacity of this tmpfs will probably be exceeded by this build. You can change
@@ -59,7 +59,7 @@ Once you have a binary, you will need to run the `daemon` sub-command as the
 root user. This can most easily be done using the `sudo` command, in a terminal:
 
 ```
-sudo /path/to/isle daemon
+sudo /path/to/cryptic-net daemon
 ```
 
 This will start the daemon process, which will keep running until you kill it
@@ -83,12 +83,12 @@ Rather than running the daemon manually, you can install it as a systemd
 service. This way your daemon will automatically start in the background on
 startup, and will be restarted if it has any issues.
 
-To do so, create a file at `/etc/systemd/system/isle.service` with the
+To do so, create a file at `/etc/systemd/system/cryptic-net.service` with the
 following contents:
 
 ```
 [Unit]
-Description=isle
+Description=cryptic-net
 Requires=network.target
 After=network.target
 
@@ -96,13 +96,13 @@ After=network.target
 Restart=always
 RestartSec=1s
 User=root
-ExecStart=/path/to/isle daemon
+ExecStart=/path/to/cryptic-net daemon
 
 [Install]
 WantedBy=multi-user.target
 ```
 
-Remember to change the `/path/to/isle` part to the actual absolute path
+Remember to change the `/path/to/cryptic-net` part to the actual absolute path
 to your binary!
 
 Once created, perform the following commands in a terminal to enable the
@@ -110,17 +110,17 @@ service:
 
 ```
 sudo systemctl daemon-reload
-sudo systemctl enable --now isle
+sudo systemctl enable --now cryptic-net
 ```
 
 You can check the service's status by doing:
 
 ```
-sudo systemctl status isle
+sudo systemctl status cryptic-net
 ```
 
 and you can view its full logs by doing:
 
 ```
-sudo journalctl -lu isle
+sudo journalctl -lu cryptic-net
 ```

docs/user/using-dns.md

@@ -1,6 +1,6 @@
 # Using DNS
 
-Every `isle daemon` process ships with a DNS server which runs
+Every `cryptic-net daemon` process ships with a DNS server which runs
 automatically. This server will listen on port 53 on the VPN IP of that
 particular host.
 
@@ -13,14 +13,14 @@ server will forward the request to a pre-configured public resolver. The set of
 public resolvers used can be configured using the
 [daemon.yml](creating-a-daemonyml-file.md) file.
 
-This DNS server is an optional feature of Isle, and not required in general for
+This DNS server is an optional feature of cryptic-net, and not required in
-making use of the network.
+general for making use of the network.
 
 ## Example
 
 As an example of how to make use of this DNS server, let's say my host's IP on
 the network is `10.10.1.1`, and my network's domain is `cool.internal`.
-In order to configure the host to use the isle DNS server for all DNS
+In order to configure the host to use the cryptic-net DNS server for all DNS
 requests, I could do something like this:
 
 ```
@@ -28,7 +28,7 @@ sudo su
 echo "nameserver 10.10.1.1" > /etc/resolv.conf
 ```
 
-From that point, all DNS requests on my host would hit the isle DNS
+From that point, all DNS requests on my host would hit the cryptic-net DNS
 server. If I request `my-host.hosts.cool.internal`, it would respond with the
 appropriate private IP.
 

entrypoint/default.nix

@@ -4,7 +4,7 @@
 
 }: buildGoModule {
 
-  pname = "isle-entrypoint";
+  pname = "cryptic-net-entrypoint";
   version = "unstable";
   src = ./src;
   vendorSha256 = "sha256-P1TXG0fG8/6n37LmM5ApYctqoZzJFlvFAO2Zl85SVvk=";

entrypoint/src/admin/admin.go

@@ -2,8 +2,8 @@
 package admin
 
 import (
-	"isle/garage"
+	"cryptic-net/garage"
-	"isle/nebula"
+	"cryptic-net/nebula"
 	"io"
 
 	"gopkg.in/yaml.v3"

entrypoint/src/bootstrap/bootstrap.go

@@ -3,9 +3,9 @@
 package bootstrap
 
 import (
-	"isle/admin"
+	"cryptic-net/admin"
-	"isle/garage"
+	"cryptic-net/garage"
-	"isle/nebula"
+	"cryptic-net/nebula"
 	"crypto/sha512"
 	"fmt"
 	"io"

entrypoint/src/bootstrap/garage.go

@@ -1,7 +1,7 @@
 package bootstrap
 
 import (
-	"isle/garage"
+	"cryptic-net/garage"
 )
 
 // GaragePeers returns a Peer for each known garage instance in the network.

entrypoint/src/bootstrap/garage_global_bucket.go

@@ -3,8 +3,8 @@ package bootstrap
 import (
 	"bytes"
 	"context"
-	"isle/garage"
+	"cryptic-net/garage"
-	"isle/nebula"
+	"cryptic-net/nebula"
 	"fmt"
 	"path/filepath"
 	"strings"

entrypoint/src/bootstrap/hosts.go

@@ -2,7 +2,7 @@ package bootstrap
 
 import (
 	"bytes"
-	"isle/nebula"
+	"cryptic-net/nebula"
 	"fmt"
 	"net"
 	"strings"

entrypoint/src/cmd/entrypoint/admin.go

@@ -2,15 +2,15 @@ package main
 
 import (
 	"context"
+	"cryptic-net/admin"
+	"cryptic-net/bootstrap"
+	"cryptic-net/daemon"
+	"cryptic-net/garage"
+	"cryptic-net/nebula"
 	"crypto/rand"
 	"encoding/hex"
 	"errors"
 	"fmt"
-	"isle/admin"
-	"isle/bootstrap"
-	"isle/daemon"
-	"isle/garage"
-	"isle/nebula"
 	"net"
 	"os"
 	"strings"
@@ -50,7 +50,7 @@ func readAdmin(path string) (admin.Admin, error) {
 
 var subCmdAdminCreateNetwork = subCmd{
 	name:  "create-network",
-	descr: "Creates a new isle network, outputting the resulting admin.yml to stdout",
+	descr: "Creates a new cryptic network, outputting the resulting admin.yml to stdout",
 	do: func(subCmdCtx subCmdCtx) error {
 
 		flags := subCmdCtx.flagSet(false)
@@ -237,7 +237,7 @@ var subCmdAdminCreateNetwork = subCmd{
 		err = garageInitializeGlobalBucket(ctx, logger, hostBootstrap, daemonConfig)
 
 		if cErr := (garage.AdminClientError{}); errors.As(err, &cErr) && cErr.StatusCode == 409 {
-			return fmt.Errorf("shared global bucket has already been created, are the storage allocations from a previously initialized isle being used?")
+			return fmt.Errorf("shared global bucket has already been created, are the storage allocations from a previously initialized cryptic-net being used?")
 
 		} else if err != nil {
 			return fmt.Errorf("initializing garage shared global bucket: %w", err)

entrypoint/src/cmd/entrypoint/bootstrap_util.go

@@ -1,7 +1,7 @@
 package main
 
 import (
-	"isle/bootstrap"
+	"cryptic-net/bootstrap"
 	"errors"
 	"fmt"
 	"io/fs"

entrypoint/src/cmd/entrypoint/daemon.go

@@ -10,16 +10,16 @@ import (
 	"sync"
 	"time"
 
-	"isle/bootstrap"
+	"cryptic-net/bootstrap"
-	"isle/daemon"
+	"cryptic-net/daemon"
 
 	"code.betamike.com/micropelago/pmux/pmuxlib"
 	"github.com/mediocregopher/mediocre-go-lib/v2/mctx"
 	"github.com/mediocregopher/mediocre-go-lib/v2/mlog"
 )
 
-// The daemon sub-command deals with starting an actual isle daemon
+// The daemon sub-command deals with starting an actual cryptic-net daemon
-// process, which is required to be running for most other Isle
+// process, which is required to be running for most other cryptic-net
 // functionality. The sub-command does the following:
 //
 // * Creates and locks the runtime directory.
@@ -196,7 +196,7 @@ func runDaemonPmuxOnce(
 
 var subCmdDaemon = subCmd{
 	name:  "daemon",
-	descr: "Runs the isle daemon (Default if no sub-command given)",
+	descr: "Runs the cryptic-net daemon (Default if no sub-command given)",
 	do: func(subCmdCtx subCmdCtx) error {
 
 		flags := subCmdCtx.flagSet(false)
@@ -213,7 +213,7 @@ var subCmdDaemon = subCmd{
 
 		bootstrapPath := flags.StringP(
 			"bootstrap-path", "b", "",
-			`Path to a bootstrap.yml file. This only needs to be provided the first time the daemon is started, after that it is ignored. If the isle binary has a bootstrap built into it then this argument is always optional.`,
+			`Path to a bootstrap.yml file. This only needs to be provided the first time the daemon is started, after that it is ignored. If the cryptic-net binary has a bootstrap built into it then this argument is always optional.`,
 		)
 
 		logLevelStr := flags.StringP(
@@ -280,7 +280,6 @@ var subCmdDaemon = subCmd{
 		case tryLoadBootstrap(bootstrapDataDirPath):
 		case *bootstrapPath != "" && tryLoadBootstrap(*bootstrapPath):
 		case tryLoadBootstrap(bootstrapAppDirPath):
-		case tryLoadBootstrap(bootstrap.DataDirPath(legacyEnvDataDirPath)):
 		case err != nil:
 			return fmt.Errorf("attempting to load bootstrap.yml file: %w", err)
 		default:

entrypoint/src/cmd/entrypoint/daemon_util.go

@@ -2,9 +2,9 @@ package main
 
 import (
 	"context"
-	"isle/bootstrap"
+	"cryptic-net/bootstrap"
-	"isle/daemon"
+	"cryptic-net/daemon"
-	"isle/garage"
+	"cryptic-net/garage"
 	"fmt"
 	"time"
 )

entrypoint/src/cmd/entrypoint/dnsmasq_util.go

@@ -1,9 +1,9 @@
 package main
 
 import (
-	"isle/bootstrap"
+	"cryptic-net/bootstrap"
-	"isle/daemon"
+	"cryptic-net/daemon"
-	"isle/dnsmasq"
+	"cryptic-net/dnsmasq"
 	"fmt"
 	"path/filepath"
 	"sort"

entrypoint/src/cmd/entrypoint/garage.go

@@ -9,7 +9,7 @@ import (
 
 var subCmdGarageMC = subCmd{
 	name:      "mc",
-	descr:     "Runs the mc (minio-client) binary. The isle garage can be accessed under the `garage` alias",
+	descr:     "Runs the mc (minio-client) binary. The cryptic-net garage can be accessed under the `garage` alias",
 	checkLock: true,
 	do: func(subCmdCtx subCmdCtx) error {
 
@@ -17,12 +17,12 @@ var subCmdGarageMC = subCmd{
 
 		keyID := flags.StringP(
 			"key-id", "i", "",
-			"Optional key ID to use, defaults to that of the shared global key",
+			"Optional key ID to use, defaults to that of the shared cryptic-net-global key",
 		)
 
 		keySecret := flags.StringP(
 			"key-secret", "s", "",
-			"Optional key secret to use, defaults to that of the shared global key",
+			"Optional key secret to use, defaults to that of the shared cryptic-net-global key",
 		)
 
 		if err := flags.Parse(subCmdCtx.args); err != nil {
@@ -82,7 +82,7 @@ var subCmdGarageMC = subCmd{
 
 var subCmdGarageCLI = subCmd{
 	name:      "cli",
-	descr:     "Runs the garage binary, automatically configured to point to the garage sub-process of a running isle daemon",
+	descr:     "Runs the garage binary, automatically configured to point to the garage sub-process of a running cryptic-net daemon",
 	checkLock: true,
 	do: func(subCmdCtx subCmdCtx) error {
 
@@ -114,7 +114,7 @@ var subCmdGarageCLI = subCmd{
 
 var subCmdGarage = subCmd{
 	name:  "garage",
-	descr: "Runs the garage binary, automatically configured to point to the garage sub-process of a running isle daemon",
+	descr: "Runs the garage binary, automatically configured to point to the garage sub-process of a running cryptic-net daemon",
 	do: func(subCmdCtx subCmdCtx) error {
 		return subCmdCtx.doSubCmd(
 			subCmdGarageCLI,

entrypoint/src/cmd/entrypoint/garage_util.go

@@ -2,9 +2,9 @@ package main
 
 import (
 	"context"
-	"isle/bootstrap"
+	"cryptic-net/bootstrap"
-	"isle/daemon"
+	"cryptic-net/daemon"
-	"isle/garage"
+	"cryptic-net/garage"
 	"fmt"
 	"net"
 	"path/filepath"

entrypoint/src/cmd/entrypoint/hosts.go

@@ -1,7 +1,7 @@
 package main
 
 import (
-	"isle/bootstrap"
+	"cryptic-net/bootstrap"
 	"errors"
 	"fmt"
 	"os"

entrypoint/src/cmd/entrypoint/main.go

@@ -12,7 +12,7 @@ import (
 	"github.com/mediocregopher/mediocre-go-lib/v2/mlog"
 )
 
-// The purpose of this binary is to act as the entrypoint of the isle
+// The purpose of this binary is to act as the entrypoint of the cryptic-net
 // process. It processes the command-line arguments which are passed in, and
 // then passes execution along to an appropriate binary housed in AppDir/bin
 // (usually a bash script, which is more versatile than a go program).
@@ -27,12 +27,8 @@ func getAppDirPath() string {
 
 var (
 	envAppDirPath     = getAppDirPath()
-	envRuntimeDirPath = filepath.Join(xdg.RuntimeDir, "isle")
+	envRuntimeDirPath = filepath.Join(xdg.RuntimeDir, "cryptic-net")
-	envDataDirPath    = filepath.Join(xdg.DataHome, "isle")
+	envDataDirPath    = filepath.Join(xdg.DataHome, "cryptic-net")
-
-	// Deprecated: envDataDirPath used to be this value, before renaming from
-	// cryptic-net
-	legacyEnvDataDirPath = filepath.Join(xdg.DataHome, "cryptic-net")
 )
 
 func binPath(name string) string {

entrypoint/src/cmd/entrypoint/nebula_util.go

@@ -2,10 +2,10 @@ package main
 
 import (
 	"context"
+	"cryptic-net/bootstrap"
+	"cryptic-net/daemon"
+	"cryptic-net/yamlutil"
 	"fmt"
-	"isle/bootstrap"
-	"isle/daemon"
-	"isle/yamlutil"
 	"net"
 	"path/filepath"
 
@@ -68,7 +68,7 @@ func nebulaPmuxProcConfig(
 			"respond": true,
 		},
 		"tun": map[string]interface{}{
-			"dev": "isle-tun",
+			"dev": "cryptic-net-nebula",
 		},
 		"firewall": daemonConfig.VPN.Firewall,
 	}

entrypoint/src/cmd/entrypoint/proc_lock.go

@@ -13,7 +13,7 @@ import (
 	"github.com/shirou/gopsutil/process"
 )
 
-var errDaemonNotRunning = errors.New("no isle daemon process running")
+var errDaemonNotRunning = errors.New("no cryptic-net daemon process running")
 
 func lockFilePath() string {
 	return filepath.Join(envRuntimeDirPath, "lock")
@@ -29,7 +29,7 @@ func writeLock() error {
 
 	if errors.Is(err, os.ErrExist) {
 		return fmt.Errorf(
-			"lock file %q already exists, if the isle daemon is not already running you can safely delete this file",
+			"lock file %q already exists, if the cryptic-net daemon is not already running you can safely delete this file",
 			lockFilePath,
 		)
 

entrypoint/src/daemon/daemon.go

@@ -1,11 +1,11 @@
 // Package daemon contains types and functions related specifically to the
-// isle daemon.
+// cryptic-net daemon.
 package daemon
 
 import (
+	"cryptic-net/yamlutil"
 	"fmt"
 	"io"
-	"isle/yamlutil"
 	"os"
 	"path/filepath"
 

entrypoint/src/garage/garage.go

@@ -19,7 +19,7 @@ const (
 
 	// GlobalBucket is the name of the global garage bucket which is
 	// accessible to all hosts in the network.
-	GlobalBucket = "_global"
+	GlobalBucket = "cryptic-net-global"
 
 	// ReplicationFactor indicates the replication factor set on the garage
 	// cluster. We currently only support a factor of 3.
@@ -35,7 +35,7 @@ func nodeKeyPubPath(metaDirPath string) string {
 }
 
 func nodeRPCPortPath(metaDirPath string) string {
-	return filepath.Join(metaDirPath, "isle", "rpc_port")
+	return filepath.Join(metaDirPath, "cryptic-net", "rpc_port")
 }
 
 // loadAllocID returns the peer ID (ie the public key) of the node at the given

entrypoint/src/go.mod

@@ -1,4 +1,4 @@
-module isle
+module cryptic-net
 
 go 1.17
 

entrypoint/src/nebula/nebula.go

@@ -159,7 +159,7 @@ func NewCACredentials(domain string, subnet *net.IPNet) (CACredentials, error) {
 
 	caCert := cert.NebulaCertificate{
 		Details: cert.NebulaCertificateDetails{
-			Name:      fmt.Sprintf("%s isle root cert", domain),
+			Name:      fmt.Sprintf("%s cryptic-net root cert", domain),
 			Subnets:   []*net.IPNet{subnet},
 			NotBefore: now,
 			NotAfter:  expireAt,

flake.nix

@@ -1,5 +1,5 @@
 {
-  description = "isle provides the foundation for an autonomous community cloud infrastructure";
+  description = "cryptic-net provides the foundation for an autonomous community cloud infrastructure";
 
   outputs = {
     self,

release.nix

@@ -16,14 +16,14 @@
     }).appImage;
 
   in pkgs.stdenv.mkDerivation {
-    name = "isle-release-${hostSystem}";
+    name = "cryptic-net-release-${hostSystem}";
     inherit releaseName appImage hostSystem;
 
     builder = builtins.toFile "build.sh" ''
       source $stdenv/setup
 
       mkdir -p "$out"/
-      cp "$appImage"/bin/isle "$out"/isle-$releaseName-$hostSystem
+      cp "$appImage"/bin/cryptic-net "$out"/cryptic-net-$releaseName-$hostSystem
     '';
   };
 
@@ -32,7 +32,7 @@
 in
 
   pkgs.stdenv.mkDerivation {
-    name = "isle-release-${releaseName}";
+    name = "cryptic-net-release-${releaseName}";
     inherit releases;
 
     nativeBuildInputs = [ pkgs.coreutils ];
@@ -42,7 +42,7 @@ in
 
       mkdir -p "$out"
       for p in $releases; do
-        cp "$p"/isle-* "$out"/
+        cp "$p"/cryptic-net-* "$out"/
       done
 
       (cd "$out" && sha256sum * > sha256.txt)