# Contributing Storage This document is for you if your host machine can be reliably be online at all times and has 1GB or more of unused drive space you'd like to contribute to the network. ## Edit `daemon.yml` Open your `/etc/isle/daemon.yml` file in a text editor, and find the `storage.allocations` section. Each allocation in the allocations list describes the space being contributed from a single physical drive. If you only have one drive then you will only need one allocation listed. The comments in the file should be self-explanatory, but ask your admin if you need any clarification. Here is an example set of allocations for a host which is contributing space from two separate drives: ``` storage: allocations: # 1.2 TB are being shared from drive1 - data_path: /mnt/drive1/isle/data meta_path: /mnt/drive1/isle/meta capacity: 1200 # 100 GB are being shared from drive2 - data_path: /mnt/drive2/isle/data meta_path: /mnt/drive2/isle/meta capacity: 100 ``` ## Set Up Your Firewall See the doc on [Firewalls](./firewalls.md), to be sure that your host's firewall is properly set up for providing storage. ## Restart the Daemon With the `daemon.yml` configured, you should restart your `isle daemon` process. The `isle daemon` will automatically allow the ports used for your storage allocations in the vpn firewall. ## Removing Allocations If you later decide to no longer provide storage simply remove the `storage.allocations` item from your `/etc/isle/daemon.yml` file and restart the `isle daemon` process. Once removed, it is advisable to wait some time before turning off the daemon or deleting the data from the data and meta directories which were previously allocated to. This gives other hosts in the network time to offload all data that yours was previously hosting. ## Further Reading Isle uses the [garage][garage] project for its storage system. See the [Managing Garage](managing-garage.md) document for more information on how to interact directly with the garage instance being run by isle. [garage]: https://garagehq.deuxfleurs.fr/documentation/quick-start/