9.0 KiB
9.0 KiB
| title | description |
|---|---|
| Erlang, tcp sockets, and active true | Using `{active:once}` isn't always the best way to handle connections. |
If you don't know erlang then [you're missing out][0]. If you do know erlang, you've probably at some point done something with tcp sockets. Erlang's highly concurrent model of execution lends itself well to server programs where a high number of active connections is desired. Each thread can autonomously handle its single client, greatly simplifying the logic of the whole application while still retaining [great performance characteristics][1].
Background
For an erlang thread which owns a single socket there are three different ways
to receive data off of that socket. These all revolve around the active
[setopts][2] flag. A socket can be set to one of:
-
{active,false}- All data must be obtained through [recv/2][3] calls. This amounts to syncronous socket reading. -
{active,true}- All data on the socket gets sent to the controlling thread as a normal erlang message. It is the thread's responsibility to keep up with the buffered data in the message queue. This amounts to asyncronous socket reading. -
{active,once}- When set the socket is placed in{active,true}for a single packet. That is, once set the thread can expect a single message to be sent to when data comes in. To receive any more data off of the socket the socket must either be read from using [recv/2][3] or be put in{active,once}or{active,true}.
Which to use?
Many (most?) tutorials advocate using {active,once} in your application
0]\[1]\[2]. This has to do with usability and security. When in `{active,true}`
it's possible for a client to flood the connection faster than the receiving
process will process those messages, potentially eating up a lot of memory in
the VM. However, if you want to be able to receive both tcp data messages as
well as other messages from other erlang processes at the same time you can't
use `{active,false}`. So `{active,once}` is generally preferred because it
deals with both of these problems quite well.
## Why not to use `{active,once}`
Here's what your classic `{active,once}` enabled tcp socket implementation will
probably look like:
```erlang
-module(tcp_test).
-compile(export_all).
-define(TCP_OPTS, [
binary,
{packet, raw},
{nodelay,true},
{active, false},
{reuseaddr, true},
{keepalive,true},
{backlog,500}
]).
%Start listening
listen(Port) ->
{ok, L} = gen_tcp:listen(Port, ?TCP_OPTS),
?MODULE:accept(L).
%Accept a connection
accept(L) ->
{ok, Socket} = gen_tcp:accept(L),
?MODULE:read_loop(Socket),
io:fwrite("Done reading, connection was closed\n"),
?MODULE:accept(L).
%Read everything it sends us
read_loop(Socket) ->
inet:setopts(Socket, [{active, once}]),
receive
{tcp, _, _} ->
do_stuff_here,
?MODULE:read_loop(Socket);
{tcp_closed, _}-> donezo;
{tcp_error, _, _} -> donezo
end.
```
This code isn't actually usable for a production system; it doesn't even spawn a
new process for the new socket. But that's not the point I'm making. If I run it
with `tcp_test:listen(8000)`, and in other window do:
```bash
while [ 1 ]; do echo "aloha"; done | nc localhost 8000
```
We'll be flooding the the server with data pretty well. Using [eprof][4] we can
get an idea of how our code performs, and where the hang-ups are:
```erlang
1> eprof:start().
{ok,<0.34.0>}
2> P = spawn(tcp_test,listen,[8000]).
<0.36.0>
3> eprof:start_profiling([P]).
profiling
4> running_the_while_loop.
running_the_while_loop
5> eprof:stop_profiling().
profiling_stopped
6> eprof:analyze(procs,[{sort,time}]).
****** Process <0.36.0> -- 100.00 % of profiled time ***
FUNCTION CALLS % TIME [uS / CALLS]
-------- ----- --- ---- [----------]
prim_inet:type_value_2/2 6 0.00 0 [ 0.00]
....snip....
prim_inet:enc_opts/2 6 0.00 8 [ 1.33]
prim_inet:setopts/2 12303599 1.85 1466319 [ 0.12]
tcp_test:read_loop/1 12303598 2.22 1761775 [ 0.14]
prim_inet:encode_opt_val/1 12303599 3.50 2769285 [ 0.23]
prim_inet:ctl_cmd/3 12303600 4.29 3399333 [ 0.28]
prim_inet:enc_opt_val/2 24607203 5.28 4184818 [ 0.17]
inet:setopts/2 12303598 5.72 4533863 [ 0.37]
erlang:port_control/3 12303600 77.13 61085040 [ 4.96]
```
eprof shows us where our process is spending the majority of its time. The `%`
column indicates percentage of time the process spent during profiling inside
any function. We can pretty clearly see that the vast majority of time was spent
inside `erlang:port_control/3`, the BIF that `inet:setopts/2` uses to switch the
socket to `{active,once}` mode. Amongst the calls which were called on every
loop, it takes up by far the most amount of time. In addition all of those other
calls are also related to `inet:setopts/2`.
I'm gonna rewrite our little listen server to use `{active,true}`, and we'll do
it all again:
```erlang
-module(tcp_test).
-compile(export_all).
-define(TCP_OPTS, [
binary,
{packet, raw},
{nodelay,true},
{active, false},
{reuseaddr, true},
{keepalive,true},
{backlog,500}
]).
%Start listening
listen(Port) ->
{ok, L} = gen_tcp:listen(Port, ?TCP_OPTS),
?MODULE:accept(L).
%Accept a connection
accept(L) ->
{ok, Socket} = gen_tcp:accept(L),
inet:setopts(Socket, [{active, true}]), %Well this is new
?MODULE:read_loop(Socket),
io:fwrite("Done reading, connection was closed\n"),
?MODULE:accept(L).
%Read everything it sends us
read_loop(Socket) ->
%inet:setopts(Socket, [{active, once}]),
receive
{tcp, _, _} ->
do_stuff_here,
?MODULE:read_loop(Socket);
{tcp_closed, _}-> donezo;
{tcp_error, _, _} -> donezo
end.
```
And the profiling results:
```erlang
1> eprof:start().
{ok,<0.34.0>}
2> P = spawn(tcp_test,listen,[8000]).
<0.36.0>
3> eprof:start_profiling([P]).
profiling
4> running_the_while_loop.
running_the_while_loop
5> eprof:stop_profiling().
profiling_stopped
6> eprof:analyze(procs,[{sort,time}]).
****** Process <0.36.0> -- 100.00 % of profiled time ***
FUNCTION CALLS % TIME [uS / CALLS]
-------- ----- --- ---- [----------]
prim_inet:enc_value_1/3 7 0.00 1 [ 0.14]
prim_inet:decode_opt_val/1 1 0.00 1 [ 1.00]
inet:setopts/2 1 0.00 2 [ 2.00]
prim_inet:setopts/2 2 0.00 2 [ 1.00]
prim_inet:enum_name/2 1 0.00 2 [ 2.00]
erlang:port_set_data/2 1 0.00 2 [ 2.00]
inet_db:register_socket/2 1 0.00 3 [ 3.00]
prim_inet:type_value_1/3 7 0.00 3 [ 0.43]
.... snip ....
prim_inet:type_opt_1/1 19 0.00 7 [ 0.37]
prim_inet:enc_value/3 7 0.00 7 [ 1.00]
prim_inet:enum_val/2 6 0.00 7 [ 1.17]
prim_inet:dec_opt_val/1 7 0.00 7 [ 1.00]
prim_inet:dec_value/2 6 0.00 10 [ 1.67]
prim_inet:enc_opt/1 13 0.00 12 [ 0.92]
prim_inet:type_opt/2 19 0.00 33 [ 1.74]
erlang:port_control/3 3 0.00 59 [ 19.67]
tcp_test:read_loop/1 20716370 100.00 12187488 [ 0.59]
```
This time our process spent almost no time at all (according to eprof, 0%)
fiddling with the socket opts. Instead it spent all of its time in the
read_loop doing the work we actually want to be doing.
## So what does this mean?
I'm by no means advocating never using `{active,once}`. The security concern is
still a completely valid concern and one that `{active,once}` mitigates quite
well. I'm simply pointing out that this mitigation has some fairly serious
performance implications which have the potential to bite you if you're not
careful, especially in cases where a socket is going to be receiving a large
amount of traffic.
## Meta
These tests were done using R15B03, but I've done similar ones in R14 and found
similar results. I have not tested R16.
* \[0] http://learnyousomeerlang.com/buckets-of-sockets
* \[1] http://www.erlang.org/doc/man/gen_tcp.html#examples
* \[2] http://erlycoder.com/25/erlang-tcp-server-tcp-client-sockets-with-gen_tcp
[0]: http://learnyousomeerlang.com/content
[1]: http://www.metabrew.com/article/a-million-user-comet-application-with-mochiweb-part-1
[2]: http://www.erlang.org/doc/man/inet.html#setopts-2
[3]: http://www.erlang.org/doc/man/gen_tcp.html#recv-2
[4]: http://www.erlang.org/doc/man/eprof.html